 |
Creating Customer Satisfaction for 37 Years! |
 |
|
    |
|||
|
|
|||
aluminum
connectors for twinwall and multiwall polycarbonate sheeting
 |
 |
 |
 |
 |
 |
 |
 |
   |
| MULTIWALL | FASTENERS | TAPE | QUOTES | INSTALLATION ? | SHIPPING COSTS | RIDGE CAPS | POLY CHANNEL | ALUMINUM CHANNEL |
ALUMINUM CONNECTORS FOR MULTIWALL POLYCARBONATE SHEETING
NOTE: IF
YOUR ORDER FOR ALUMINUM CHANNEL IS UNDER $1000 BEFORE THE SHIPPING IS
CALCULATED, YOU WILL NEED TO REQUEST A SHIPPING QUOTE.
'CLICK
HERE' FOR A FURTHER EXPLANATION AND HOW TO
PROCEED.
| The aluminum U and H Cap & Base systems shown below are for use with multiwall polycarbonate panels. Polycarbonate extrusions are in a choice of mill, bronze and anodized finishes. They are available in several shapes including "U" end caps and joining "H" shapes. Also available is a two-piece joining extrusion which consist of a base, which is fastened to the frame and a cap which snaps into place to hold the sheets (Cap & Base). These profiles are non-structural and depend on the frame of the structure for support. Unless specified, the aluminum cap & base do not require any gasket material. |
| PLEASE READ BEFORE YOU ORDER: The items listed below can be purchased in small quantities. However, there is a small order fee of $35 on orders that total under $601. Also, there can be other freight charges that do not show on your online order. Small quantities of profiles cannot be shipped via UPS if they are over 8 ft long, otherwise they will ship via common carrier freight. If you have shipping questions please call us at 888-966-7877 | |||||||
| 'Click Here' To Check Shipping Before You Order | |||||||
| STYLE |
Sheet Thickness |
Standard Lengths | FINISH |
Cost per ITEM |
Order Online | ||
| ALUMINUM U-CHANNEL | |||||||
|
|
8 mm | 8 ft | Mill |
$15.69 |
 |
||
| 8 ft | Anodized | $24.97 |
|
||||
 |
8 mm | 12 ft | Anodized | $37.87 |
|
||
| 8 mm | 24 ft | Anodized | $75.74 |
|
|||
 |
10 mm | 3 Pcs 4 ft Long | Anodized | $47.29 |
|
||
| 10 mm | 2 Pcs 6 ft Long | Anodized | $47.29 |
|
|||
 |
16 mm | 8 ft | Mill |
$18.88 |
|
||
| 8 ft | Anodized | $32.32 |
|
||||
 |
16 mm | 12 ft | Anodized | $49.97 |
|
||
| 24 ft | Anodized | $99.94 |
|
||||
 |
25 mm | 8 ft | Mill | $27.37 |
|
||
| 25 mm | 8 ft | Anodized | $38.09 |
|
|||
| 25 mm | 12 ft | Anodized | $57.14 |
|
|||
 |
6mm thru 24mm | 8 ft | Aluminum Corner Mill | $37.44 |
|
||
| 6mm thru 24mm | 8 ft | Aluminum Corner Anodized | $47.99 |
|
|||
| ALUMINUM MILL FINISH H-CHANNEL (GASKET NOT REQUIRED) | |||||||
 Mill Finish Aluminum H Base & Cap with Mounting Screws Gasket not Required |
Fits 8 mm thru 25 mm
Panels If you can't use standard cuts shown, tell us at check out what finish lengths you need. (use comment section to list the lengths you need) |
6 ft | Finish Cut: 4 Pcs 6 ft Long, Mill Finish | $114.99 |
|
||
| 8 ft | Finish Cut: 3 Pcs 8 ft Long, Mill Finish | $114.99 |
|
||||
| 12 ft | Finish Cut: 2 Pcs 12 ft Long, Mill Finish | $114.99 |
|
||||
| 24 ft | Finish Cut: 1 Pcs 24 ft Long, Mill Finish | $114.99 |
|
||||
| 24 ft | Tell Us What Length To Cut | $114.99 |
|
||||
| ALUMINUM ANODIZED FINISH H-CHANNEL (GASKET NOT REQUIRED) | |||||||
|
Anodized Finish Aluminum H Base & Cap with Mounting Screws Gasket not Required |
Fits 8 mm thru 25 mm
Panels If you can't use standard cuts shown, tell us at check out what finish lengths you need. (use comment section to list the lengths you need) |
6 ft | Finish Cut: 4 Pcs 6 ft Long, Anodize Finish | $165.99 |
|
||
| 8 ft | Finish Cut: 3 Pcs 8 ft Long, Anodize Finish | $165.99 |
|
||||
| 12 ft | Finish Cut: 2 Pcs 12 ft Long, Anodize Finish | $165.99 |
|
||||
| 24 ft | Finish Cut: 1 Pcs 24 ft Long, Anodize Finish | $165.99 |
|
||||
| 24 ft | Tell Us What Length To Cut | $165.99 |
|
||||
| ALUMINUM MILL FINISH H-CHANNEL WITH GASKET | |||||||
|
|
 |
||||||
| ALUMINUM CAP & BASE | ALUMINUM BASE & CAP (SHOWING GASKET) | ||||||
| THIS CHANNEL NEEDS TO BE CRATED AND SHIPPED LTL. CALL IF YOU HAVE QUESTIONS 888-966-7877 | |||||||
| 6 mm thru 40 mm | 24 ft Long | Satin Anodized Finish | $299.00 |
|
|||
| 6 mm thru 40 mm | 12 ft Long | Satin Anodized Finish | $149.50 |
|
|||
| End Caps | Fits All | Add How Many End Caps You Need | $2.99 ea |
|
|||
 |
Fasteners for the Poli-Lok Cap & Base System Enough fasteners for 1, 24 ft section with two end caps. Spaced every 24 inches. 'click here' for Poli-Lok installation instrucktions $9.99 |
||||||
|
Note: Specifying your profiles
to be cut in 8' or less increments will lower shipping cost.
'click here' To Find Out How To Order Various Lengths. 'click here' for general assembly information |
|||||||
| Copyright 2019, All Rights Reserved Including Page and Website "Look & Feel" |
Greenhouses Etcetera
"an EncepCo Company"
PO BOX 914
Benton City, WA 99320
toll free 1-888-966-7877