 |
|
Creating Customer Satisfaction
for 34 Years! |
 |
    |
|
fasteners for
twinwall and multiwall polycarbonate

The glazing systems and fasteners
shown below are for use with multiwall polycarbonate panels.
What type of screw should you use when installing polycarbonate
panels? It is important to choose the correct fastener
for your specific application. We recommend using a minimum of #10 course
screw for soft woods (fir, pine, cedar or spruce) and #10 self-drilling screw for metal, such as
aluminum or steel. (Fasteners should penetrate the roof or wall
of your structure by at least one (1) inch.) Use at least a 1/2"
non-conductive EPDM bonded washer. It is okay to use a larger
washer. (Minimum outside diameter of washer needs to be 1/2".)
In an area of heavy winds, use
1" Diameter Neoprene Bonded Steel Washer.
|
CALL US FOR THE SPECIFIC FASTENER
YOU NEED BY COLOR OR TYPE OF STEEL 888-966-7877
|
   


Copyright 2017, All Rights Reserved Including Page and Website
"Look & Feel"
|
Greenhouses
& Supply
"an EncepCo Company"


PO
BOX 914 Benton City, WA 99320
toll free 1-888-966-7877
contact us
|